From: curd@notformail.com   
      
   On Sat, 13 Jul 2019 22:34:00 -0400, default wrote:   
      
   > I wound a 1 KVA Induction coil/transformer with some 13 miles of 32 AWG   
   > in the secondary. Took about a month, but I'd already built a winder for   
   > Tesla coils and modified it to wind multi-layer bobbins.   
      
   I admire your determination! I have a screw-cutting lathe which is ideal   
   for this kind of thing. I can just stand there with a reel of wire   
   putting a little tension on it as it gets unwound and a short time later,   
   a *perfectly* spaced coil emerges.   
   The OP could also try microwave oven transformers. He'd have to re-wind   
   one as they're not much use as they come. But the *are* next to free to   
   come by from your local recycling centre and ideal for experimenting with.   
      
      
      
   --   
   This message may be freely reproduced without limit or charge only via   
   the Usenet protocol. Reproduction in whole or part through other   
   protocols, whether for profit or not, is conditional upon a charge of   
   GBP10.00 per reproduction. Publication in this manner via non-Usenet   
   protocols constitutes acceptance of this condition.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)