From: ron@null.invalid   
      
   2-car garage door won't open but five inches under certain circumstances.   
   Closes just fine.   
      
   However   
   (1) If I open from the inside wall switch, it always opens.   
   (2) But if I open from the remote control, it often stops after 5 inches.   
      
   You'd think it's the remote but when I use the outside remote that is   
   mounted to the wall, it does the same thing, so it's not the remote per se.   
      
   Replaced the remote batteries anyway.   
   Same thing.   
      
   The springs are big fat dual springs, which are about five years old or so.   
   If they're "sagging", I don't see any physical evidence of that weakening.   
      
   There was an original red paint line which the manufacturer painted onto   
   the unwound spring which is now a spiral when wound, understandably so.   
      
   I had painted a thin white line across the wound springs when they were   
   installed and that line doesn't appear to have moved. It's still straight.   
      
   I air blasted the rollers and track and greased but it made little to no   
   difference and I cleaned the mechanism inside the garage door opener.   
      
   What appears to be what's happening is the garage door opener, which has to   
   be twenty years old if not older, is suddenly "needing" more time to start.   
      
   Can that be?   
   Is there an adjustment in the garage door opener itself for pulse time?   
      
   Since the door opens fully if it has "more time" on the switch,   
   is there any way to make a remote 'stay on' longer than just a pulse?   
      
   Ron, the humblest guy in town.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)