From: legg@nospam.magma.ca   
      
   On 31 Aug 2025 15:22:15 -0700, peter@easthope.ca wrote:   
      
   >Hi,   
   >   
   >Connecting a Hantek HT-25 ignition pickup to a Owon HDS2202S mounted   
   >on the dashboard of a vehicle.  The HT-25 has a BNC connector.   
   >   
   >The firewall has an opening about 4 cm diameter covered with a rubber   
   >plug which can be pierced with a handheld punch.  Rather than punch a   
   >hole for the HT-25 BNC connector, I think of connecting a RG-174/U   
   >cable with LEMO 00 connectors using a BNC-LEMO adapter.  Then pass the   
   >LEMO connector through the plug. Another adapter will be needed on the   
   >scope.   
   >   
   >I'm not familiar with coax usage.  Is the arrangement OK?   
   >   
   >Thanks,             ... P.   
   >   
   >   
      
   You sure it's BNC?   
      
   There is a similar HT connector that won't fit BNC hardware.   
      
   BNC may be a misapplication.   
      
   RL   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)