From: rich.ecot@gmail.com   
      
   Just thought I'd share this.  I have a first gen Flir One thermal imager.  The   
   temperature range is limited to 0C to 100C.  I wanted to image a commercial   
   iron to see the heat uniformity, but its temperature on a cotton setting went   
   above 200C.   
      
   Thought of a simple solution.  I used multiple layers of polyethylene from a   
   Zip-lock bag to attenuate the signal and it worked well.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)