From: poutnik4nntp@gmail.com   
      
   Dne 31/08/2015 v 08:04 Poutnik napsal(a):   
      
   >>   
   > Good hint will be provided, if you measure time curve,   
   > how fast reach the measured temperature the steady value   
   > in constant temperature bath. But it relies on similar values   
   > for thermometer and for the test tube themselves.   
      
   You can compare 2 melting point values,   
   one taken at very slow heating,   
   the other at rate intended to be used.   
      
   Then chose the maximal rate   
   without noticed difference yet.   
   >   
   > AFAIK, typical values used for heating were   
   > about 0,5-1 deg C / min.   
   >   
   >   
      
      
   --   
   Poutnik ( the Czech word for a wanderer )   
      
   Knowledge makes great men humble, but small men arrogant.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)