From: treon3verdery@gmail.com   
      
   10/14/21 turning the kind of air pollution from 2020 liquid and nonliquid   
   hydrocarbons called pm 2.5 to much more physiologically harmless pm.025-1 or   
   eentsier; previously written at a paper notebook is that amorphous   
   buckminsterfullerene glass is more    
   than 1000 times harder than diamond so as a fuel injector technology i use it,   
   with sonoluminscent strength laser plasma to clean baked on grime, soot,   
   shellac off of fuel injectors airpuffing it out of the fuel injector orifice   
   with diamond-   
   disintegrating force (newtons) laser plasma motionized air, possible charged   
   to be mostly ozone to react away carbon, element S, and mineral deposits on   
   fuel injectors; this allows the making of 3-11 times as many fuel injector   
   tubes that tend to make a    
   smaller atomized spray because the fuel injector diameter is optimized, and   
   the droplet flow from the fuel injector comminuted to little spurt lengths   
   with ultrasonics or micrometer sized mechanisms called water hammers that have   
   about 1 moving part,    
   similar to a bubble cap, and often a particular angle of branching to cause   
   flow to the water hammer; genetic algorithms seeded with engineers basic forms   
   to produce what is technically called plug flow can also be used to produce   
   short length pulses of    
   fuel and air at fuel injectors utilizing no moving parts; the purpose of the   
   brief linear slugs of fuel, at .25 to 1 micrometer apertures is to 1) oxidize   
   fuel as efficiently as possible for piston motion, or at nonliquid hydrocarbon   
   energy plants use    
   sonoluminscent strength laser plasma to airpuff solid hydrocarbon particles   
      
   Solid hydrocarbon ash shrinking/compressing lasers, ultrasonics, or cheap   
   chemical additives like ozone, basic oh- electrode produced water, or onsite   
   reacted atmospheric nitrogen to make ash compressing or melt-to-higher-density   
   Nitrogen trichloride, similar to nitrogen triiodide explosive could be made   
   from chlorine based on saltwater, even seawater electrolysis that produces   
   chlorine gas that reacts with a nitrogen compound from onsite production of   
   nitrogen to make an    
   explosive nitrogen trichloride, or an explosive nitrogenated oxygen-chlorine   
   molecule, i have heard of chlorite and hypochlorate so perhaps very cheap to   
   manufacture from saltwater and air nitrogen hypochlorite is ultraffordable for   
   making newtons of    
   force at continuous or pulsatile detonation that compresses ash; compressing   
   ash in the exhaust flue could reduce previously pm2.5 particles to eentsier   
   less deleterious size, or, physically compress any and all forms of the ash at   
   the flue while it is    
   already warmed to be softened, and further cheaply compressed at various flue   
   diameter depths with ultrasonic transducers, compressing all the exhaust flue   
   ash to 1/4 to 1/8 the volume of its previous lacey foamy high surface area ash   
   density, the much    
   higher mass density ash microparticles or also nanoparticles could be removed   
   with centrifuging, or a pressurized air coanda flow laminar flow motionized   
   gas or fresh air system that does something like gold panning of the flue   
   particles with air to    
   concentrate them for removal to produce cleaner flue gas and cleaner air,   
   another use of custom compressing and concentrating flue ash is, noting flue   
   ash is already used as a concrete ingredient, custom sizes, densities, and   
   surface characteristics of    
   coal plant compressed flue ash like extra high wettability dendritic or porous   
   or even possibly spaced line crenellated surfaces could be possible and have   
   more $ value than uncompressed or shaped, particle size optimized exhaust flue   
   ash products that    
   make better concrete.   
      
   An actual engineer would scale up from a laser effect, ultrasound effect,   
   explosive chemical effect, or "chemical like ozonated water or even a metal   
   salt chlorinated, ethynylized, phosphate very very high "dose potency" wetting   
   agent detergent, the    
   detergent would be introduced as a spray as early in the flue path as   
   possible; it might even have a cheap inorganic deliquescent in it that   
   functions to pull water out of the air like KPCA of NaPCA introduced at a wet   
   steam airflow region (widening,    
   venturi exit, even cold water radiator); introducing the ultra cheap   
   surfactant or detergent oxychlorinated high phospate rock powder, that is,   
   phosphate rock is 136/metric ton (2021), and using it as a reagent to make a   
   super cheap wetting agent/   
   detergent/flue ash and sulfur modifier with reagents like chlorine gas, ozone,   
   cheap coal tar and hydrogen from electrolysis of fresh or saltwater combines   
   cheap plentiful materials to remove or shrink ash or sulfur from coal;   
   railcars of salt are likely    
   cheap, but many locations could drill a brine well making less polluting coal   
   energy plants near the mine both possible and cheaper to build than some other   
   energy technologies   
      
   or similar electricity + fresh/salt water or cheap swing compressor oxygen and   
   nitrogen concentrator/separator to make oxygen for ozone or onsite shockwave   
   producing nitrogen for explosives are ultraffordable materials an actual   
   engineer could use well   
      
   It is also possible to increase flue gas and environmental air quality from   
   glomming together big agglomerations and have them spontaneously gravity sort   
   out, travel esrthward to an automatic canal or dumpster like hopper that is   
   big enough to utilize    
   automatic emptying every 24 hours; one approach to making big clumps is making   
   ultrasonic above the range of human hearing, and laser or microwave flue   
   particulate, ash, and sulfur compression and other wave makers (visually, a   
   )))))) striated shockwave    
   compresses hundreds of 9 cm airspaces; doing something like chladni plate sand   
   vivration plates in 3D space or making ash+sulfur+mineral 3D shock diamonds as   
   they are called; these computer optimized 3D pressure forms press together   
   liquid sulfur and fly    
   ash and minerals at a wide cooled spot in the flue (consider the hyperbolic   
   praboloid )( cooling tower that often accompanied 20th century nuclear   
   reactors) or even the pumped cold water radiator causing it to stick together   
   enough to coagulate and drop    
   out of the gas stream into an opening or hopper that automatically empties the   
   24-72 hour accumulation of coagulated higher mass ash-sulfur-mineral blobules;    
      
      
   [continued in next message]   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)