From: treon3verdery@gmail.com   
      
   Electrical stalagtites, stalagmites, and petroleum and other industry zeolites   
   grown in an electric charge field and a magnetic flux: adjust any of wide tube   
   narrow tube, hollow tubes look like crystals vertices you get to adjust which   
   elemental atoms    
   are at vertices, drawersides, compare a new kind of activated carbon or   
   charcoal or ion exchange resin where because it is filled up with ion water   
   then warmed to crystallize the effect of electricity and the effect of   
   magnetism effect size and charge of    
   crystal clumps. Cheap reusable electret charge making salt like rochelle salt,   
   when it makes activated carbon or zeolite produces immediate contact area   
   negative or positive electret. An electret zeolite could be much more   
   catalytic at chemical process    
   industries/petroleum industry because i read that electrified catalysts can be   
   650% or 300% more active, and another paper from the graph seems to suggest   
   1000-10,000% greater activity at electrically supplied charged ammonia making   
   catalysts. To make a    
   really super active electrically conducting zeolite, even though i perceive   
   petroleum catalyst zeolite to be an insulator just zap it with a million to   
   billion microbeam hole drilling laser at a 11 cm diameter blob, then utilize a   
   spray of electroless    
   plating solution, ultrasonically penetrated through the drilled holes, this   
   makes all million to billion thru holes into conductive dots at the interior   
   of the zeolite, then because a million holes in 11 cm diameter makes the holes   
   just 100 nm apart.    
   That means only a low voltage, imaginably 1/10-1 volt is needed for   
   electricity to spark gap jump between the metal filled holes at the interior   
   of the laser drilled, metal-fills-drillholes zeolite, this, as described,   
   based on the heightened    
   effectiveness of published other forms of electrically powered catalysts being   
   from 6.5-100 times more producing of preferred reaction, and preferred   
   reaction product make the zeolites orders of magnitude better at making   
   petroleum products. Noting the    
   extreme environments of some refining and Chemical process industries   
   processes it is possible to fill the drillholes with electroless plating   
   solution that deposits electrically conductive nickel chromium alloy, like   
   chemical resistant hastelloy. If the    
   thickness of the plating of the laser drill holes is highly adjustable   
   utilizing different %ages of plating metal then startling things like voltage   
   conductive but only 1 nm thick platings of super durable materials like   
   tungsten, vanadium, ruthenium,    
   and even, using a nonaqueous polar solvent, titanium or iron, or cobalt, or   
   lanthanide metals is possible and affordable. The actual path of the   
   electricity that makes a conductor dot zeolite hypercatalytic can be based on   
   such varied conductor/   
   electricity source designs as a big "bag/cube/retaining wall of rocks"   
   surrounded with chainlink fence i once saw, to the exterior of the 11 cm   
   diameter zeolite having an electricity from induction inkjet printed multicm   
   size antenna that might look like    
   an RFID antenna printed on it. The diamond weave metal bag around thousands of   
   11 cm zeolites with 11% surface hastelloy plating on it permits zeolite sphere   
   or other shape always a conductibe pathway contact, and CPI reagent/chemical   
   flow through the    
   metal diamond bag, and noting different chemistry occurs at different heights   
   of a petroleum or CPI reactor, at each column packing tray location there   
   could be a chainlink fence-ish container of zeolite shapes/rocks/other   
   geometries. It might not be    
   easier, but it might be smoothly catalytic to have a coninuous gradient of   
   loose floating galileo's neutrally bouyant thermometer zeolites at the   
   column/reactor.  Also, in published work on not just electrified catalysts,   
   having the catalyst operate in a    
   magnetic field heightens catalytic effect. Some ways of putting magnetism   
   on/with 11 cm zeolite forms are 1) temperature demagnetism dubious, but very   
   cheap 1 tesla, alibaba 1 cent disk or other shape permanent magnet at the   
   center of each zeolite blob.    
   2) making the hastelloy RFID antenna on the outside of the zeolite blob be 2-4   
   times larger and have a thick silkscreened ferrite layer or internal   
   electromagnet to make magnetism with, and the bigger RFID like inductor which   
   i think can be very cheaply    
   inkjet printed on, picks up EM emitted at an antenna within the column or   
   other shaped CPI/petroleum reactor. This has the additional energy efficiency   
   effect of all the EM/RF that does not reach zeolite blobs simply adding to   
   process chemistry    
   supporting column warming, 3) I'm just assuming the petroleum catalytic   
   zeolite noodles that look 3mm cylinder width, 4-7cm long are the right size.   
   These could be super cheaply printed, or 3-7% surface area metal thread   
   wrapped as they come out of the    
   extruder. This has the effect of looking like a 3mm times 7mm wire inductor.   
   An ultraffordable wire coil no core inductor is 3/10 of 1¢, the 1¢ ones are   
   nearer the size of a zeolite noodle. if the zeolite extruder machine is   
   working well i think it can    
   extrude a ((O)) inducible magnetism cheap fe2o3 ferrite slotted surface for   
   fluid flow tubular simultaneous catalytic volume and induced electricity   
   magnet.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)