[continued from previous message]   
      
   Laser drilled holes and countersunk distal parts at dwelling and commercial   
   framing construction and plywood or ceramic sheathing construction could use   
   something big like 3-4 mm diameter stainless steel composite dowels instead of   
   nails   
      
   Finishing nails could be 1/10mm top surface if they were shaped like double   
   facing parenthesis () with tiny distal ends and a midnail surface contacting   
   surface joining area. Çomputerized percussion kind of like dot matrix print   
   heads could drive them   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)