From: treon3verdery@gmail.com   
      
   Technology that causes 111 times physically less big, fully functional, or   
   also enhanced function electrical generators, transformers, motors,   
   electromagnets, in and out force technology objects, magnetic disk platters,   
   mass drivers, magnetic catalysts,    
   magnetooptical effect technologies, magnetic brain, nerve, and tissue   
   stimulators like tms, particle accelerators, magnetohydrodynamic technology   
   items, and possibly magnet optimized antennas, Mri, fmri body and brain   
   scanners, NMR spectroscopes,    
   agricultural magnetic technologies that benefit plants, and a new thing, high   
   magnetic field, like annular field shockwave compression of metal, ceramic,   
   polymer, concrete and asphalt compression such that the compression and peak   
   force areas at the    
   entire volume of material have an effect like laser peening to increase   
   durability and resistance to cracking, 15-20 times, as well as heighten   
   corrosion resistance not just at the surface, and also at the entire volume of   
   material, the technology is    
   based on a coin squishing single zap magnet i read about online that,   
   apparently without noteably warming the metal disc causes it to be much   
   thicker but at about 1/3 less diameter, approximating the magnetic field of   
   the coin sqjisher, without accuracy,    
   each sequential tesla of magnetism is about a ^2 magnetic field increase, so a   
   7 tesla mri is about 128 times more magnetic, a known 45 tesla magnet that   
   omits shattering its own winding exists, the coin squisher magnet   
   disintegrates its few loop    
   magnetic winding near instantly, suggesting the coin squisher magnet is   
   between 19 and 40 teslas,   
      
   A lot like laser peening and supported with coolish magnetic coin sqishers is   
   at entire depth and fullness of metal or even diamagnetic material like a   
   polymer or ceramic, a high shockwave, likely repeated double digit tesla pulse   
   causes compession,    
   tension, and expansion at depth that causes, at laser peened surfaces 15-20   
   times greater strength and durability, magnetic depth peening i think has the   
   high utility attribute of making the entire depth and fullness of the material   
   15-20 times stronger,    
   or a greater amount than that because computer optimized three dimensional   
   structures like geodesics of tension and compression can be made throughout   
   the material, a novel use for this is that some electric cars are built on a   
   thing called a skate,    
   taking individual parts of the skate and magnetic depth peening them causes   
   them to be 15-20 times or greater stronger, that brings up the ability to   
   engineer a skate that is just as strong while being made of 20 times less   
   material, which at an electric    
   vehicle increases efficiency, similarly, at a hydrocarbon oxidation vehicle   
   the engine block and drive train, and other parts could be depthily magnetic   
   peened and weigh 20 times less, heightening energy efficiency, thinking of   
   rebar that is depth    
   magnetic peened, this causes structures to utilize rebar that is 20 times   
   stronger for the same $, causing greater structural strength, at chemical   
   process industry reactors made of minimally chemically reactive strong alloys   
   like hastelloy, being able    
   to make these reactors with 1/20th the mass and material $ increases   
   profitability, and promotes more rapid technological advancement, another   
   magnetic depth peening product is the wire used in generators, transformers,   
   motors, and electromagnets, making    
   these 2-20 times stronger, or making very strong metal sheaths like tungsten,   
   and tungsten superalloys around the main conductors or wires makes it so that   
   very high 24-40 tesla field electric generators like utility electric   
   generators, transformers,    
   including utility power distribution transformers, and motors and   
   electromagnets are able to accomodate their own high magnetic field when they   
   are utilized, such that their wire windings omit disintegration even at near   
   or partial magnetic coin squisher    
   field intensities   
      
   A generator or motor that is 111-200 times physically smaller is, i think,   
   possible with high tesla fields, and fractions of magnetic coin squisher   
   currents, very high currents that are less than coinsquisher currents could   
   produce an 11 tesla field at    
   both the stator and the rotor, i am unknowledgeable, but perceive an 11 tesla   
   field is about 2048 times stronger than a 1 tesla field,   
      
   Some versions of new to me electromagnets being part of the conductive   
   pathway, prevously described as a winding at a generator, transformer, or   
   motor winding are, noting two same pole magnets facing each other have   
   compressed field lines and very high    
   magnetic field, a variation on that is to have the two same pole magnets be   
   like edge touching clock hands angled to each other, and test 11 different   
   hingelike angles to each other to find the greatest concentration of field   
   lines that cause a large, or    
   largest magnetism field protuberance, whether that is a kind of magnetic field   
   3D many field lines parabola, or is from the two magnet contact or .4-.8 mm   
   spacing rather than contact at the hinge, this could be a way to have a tall   
   magnetic field that    
   travels from the stator, farther than the rotor stator gap to actually put its   
   high intensity parabola at some depth into the rotor, highly at the   
      
      
   [continued in next message]   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)