TZUTC: -0700
MSGID: 54877.sync@1:103/705 2d2ae599
REPLY: 73973.sync@723:320/1 2d2a8e0c
PID: Synchronet 3.21a-Linux master/7acaccaf1 Sep 08 2025 GCC 12.2.0
TID: SBBSecho 3.29-Linux master/7acaccaf1 Sep 08 2025 GCC 12.2.0
COLS: 80
BBSID: VERT
CHRS: CP437 2
FORMAT: flowed
NOTE: FSEditor.js v1.105
  Re: sbbsecho issue
  By: Dumas Walker to DIGITAL MAN on Fri Sep 12 2025 10:07 am

 > >  > So it will show up in the sbbs console, and the syslog, if set to
 > >  > "informational"?
 >
 > > Correct.
 >
 > Thanks.  As I had mentioned running it manually from a terminal, I wanted to
 > be sure we were both talking about the sbbs console and not the terminal
 > console.

Sorry, yes, in the case of SBBSecho, the log file is sbbsecho.log (or whatever
you have configured), not syslog. And sbbsecho output doesn't go to the "sbbs
console" either. Still, the configured log level determines what log messages
will go to the log file.
-- 
                                            digital man (rob)

Synchronet/BBS Terminology Definition #55:
MQTT = Message Queue Telemetry Transport Protocol
Norco, CA WX: 69.0øF, 73.0% humidity, 11 mph W wind, 0.00 inches rain/24hrs
--- SBBSecho 3.29-Linux
 * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
SEEN-BY: 4/0 88/0 90/0 93/1 103/705 105/81 106/201 128/187 129/14
SEEN-BY: 153/7715 154/10 110 218/700 221/1 6 226/30 227/114 229/110
SEEN-BY: 229/206 317 400 426 428 470 700 705 240/1120 266/512 280/464
SEEN-BY: 291/111 301/1 113 320/219 322/757 341/66 200 234 342/200
SEEN-BY: 396/45 460/58 633/280 712/848 900/0 102 106 902/0 19 26 904/13
SEEN-BY: 905/0 5019/40 5020/1042 5075/35
PATH: 103/705 301/1 341/66 902/26 229/426