TZUTC: -0500
MSGID: 74066.sync@723:320/1 2d3e4611
REPLY: 54963.sync@1:103/705 2d3cf3a8
PID: Synchronet 3.21a-Linux master/123f2d28a Jul 12 2025 GCC 12.2.0
TID: SBBSecho 3.29-Linux master/fa6202f2a Sep 26 2025 GCC 12.2.0
BBSID: CAPCITY2
CHRS: CP437 2
FORMAT: flowed
> I've heard of having that problem with Syncterm, but it's not expected. You
> should not be having them, and I'm not sure what causes it. What version of
> Syncterm are you using? Was it precompiled or did you compile it? Maybe
> something to try is to run it from the terminal and do a "stty erase ^V^H"
> (that's ctrl-V, ctrl-H) before running "syncterm".

I am using 1.1rc4.  I am pretty sure I compiled it myself.

> Also, XEP-80 is just if you want 80 column ATASCII. Most of the boards will
> look best in regular 40 columns. Can't remember if it's just called "Atari"
or
> what.

I think it is called Atari.  I tried that one first and it didn't work well
for this particular BBS.  I tried the XEP-80 next and the board displayed
quite well.

I remember using CTRL-M back in the old days on some boards (not sure they
were Atari) so I didn't think much of that one, but not having a working
BKSP key was a little more (minor) annoying.  ;)


 * SLMR 2.1a * Home Safety Tip #1. Don't iron whilst naked.
---
 þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
 * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
SEEN-BY: 103/705 105/81 106/201 124/5016 128/187 129/14 153/757 7715
SEEN-BY: 154/10 30 110 203/0 218/700 221/0 226/30 227/114 229/110
SEEN-BY: 229/206 317 400 426 428 470 700 705 240/1120 5832 263/1 266/512
SEEN-BY: 280/464 5003 5006 291/111 292/8125 301/1 310/31 320/219 322/757
SEEN-BY: 341/66 234 342/200 396/45 423/120 460/58 256 1124 467/888
SEEN-BY: 633/280 712/848 770/1 902/26 5020/400 8912 5054/30 5075/35
PATH: 103/705 280/464 460/58 229/426