TZUTC: -0400
MSGID: 58804.sync_sys@1:103/705 2d74c0ff
REPLY: 58803.sync_sys@1:103/705 2d744e4d
PID: Synchronet 3.21a-Linux master/c1820d521 Oct 31 2025 GCC 12.2.0
TID: SBBSecho 3.31-Linux master/d39e01091 Nov 03 2025 GCC 12.2.0
BBSID: OVERFIT
CHRS: ASCII 1
FORMAT: flowed
On Fri, 7 Nov 2025 09:55:38 -0800
"Digital Man" (VERT) wrote:
> Re: Re: How do I install an Lets Encrypt Certificate.
> By: Mojo to All on Thu Nov 06 2025 10:59 pm
>
> > > > 2.
> > > > I tried adding the folloing to the bottom of the [Mail]
> > > > section in sbbs.ini:
> > > > Secure = true
> > > > CertificateFile = ./ssl_certs/fullchain.pem
> > > > KeyFile = ./cryptlib.key
>
> > > Those keys don't seem to be supported or documented anywhere.
> > > How'd you come up with that?
>
> > I saw them here so just tried them.
> > https://nettwerked.synchronetbbs.org/?page=
> > 001-forum.ssjs&sub=dove-syncdisc&thread=1575
>
> I'm guessing that's just some AI slop. Those keys in sbbs.ini
> "CertificateFile" and "KeyFile" and "Secure" will do absolutely
> nothing.
>
> > Its failing due to the keys I added to the [Mail] section.
> > *** SSL/TLShandshake failed ***
>
> No, those keys you added will be ignored and have no effect on the
> mail server.
So there is no way of using already existing key/cert pair from LE
other than thru the module or go with the self-generated cert that sbbs
does? That is getting them into ctrl/ssl.cert.
---
* Synchronet * Overfit! Bringing back the golden era of BBS Networking.
[telnet://playmate.dynu
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
SEEN-BY: 103/13 705 105/81 106/201 124/5016 128/187 129/14 153/757
SEEN-BY: 153/7715 154/10 30 110 203/0 218/700 221/0 226/30 227/114
SEEN-BY: 229/110 112 206 317 400 426 428 470 700 705 240/1120 5832
SEEN-BY: 263/1 266/512 280/464 5003 5006 291/111 292/8125 301/1 320/219
SEEN-BY: 322/757 341/66 234 342/200 396/45 423/120 460/58 633/267
SEEN-BY: 633/280 384 410 414 418 420 422 2744 712/848 770/1 902/26
SEEN-BY: 5020/400 5075/35
PATH: 103/705 280/464 633/280 229/426
|
