MSGID: 1:396/45.0 fc833602
REPLY: 53.tub@1:2320/105 242d5066
CHRS: IBMPC 2
Hello Dumas (or Mike).



 DW> @TZUTC: -0500
 DW> @MSGID: 53.tub@1:2320/105 242d5066
 DW> @REPLY: 1:396/45.0 fc6a8011
 DW> @PID: Synchronet 3.18a-Linux  May 24 2020 GCC 7.5.0
 DW> @TID: SBBSecho 3.11-Linux r3.173 May 24 2020 GCC 7.5.0
 DW> @CHRS: ASCII 1
>I've asked one of the Nodes that feeds off me to send a NetMail to me
>to see what happens.

 DW> Based on some of the other messages here, I would ask that node
 DW> what they are using as the PacketType setting for your node in
 DW> their sbbsecho.ini file.  Maybe they need to change that to
 DW> something else?

It seems that everyone is using the 2+ type packet.  As you can see from the
quoted message kludge lines above, the @MSGID line, which includes the
extraneous characts worked fine since this this EchoMail unlike NetMail where
it plays hell with Squish.  There's bound to be something that can be
addressed with regards to that; I *seriously* doubt that Squish is at fault.

Best regards,
Marc

--- timEd/2 1.10.y2k+
 * Origin: Sursum Corda! BBS-Huntsville,AL-bbs.sursum-corda.com (1:396/45)
SEEN-BY: 1/123 18/200 19/33 90/1 105/81 106/633 987 120/340 123/131
SEEN-BY: 124/5014 5016 130/803 203/0 221/0 226/30 227/114 702 229/101
SEEN-BY: 229/424 426 550 664 1016 240/2100 5138 5411 5832 5853 249/206
SEEN-BY: 249/317 400 261/38 280/464 5003 292/854 8125 317/3 322/757
SEEN-BY: 342/200 387/25 396/45 633/280 2432/390 2454/119
PATH: 396/45 280/464 240/5832 229/426