MSGID: 2:221/1.58@fidonet 127f7a8f
REPLY: 1:154/10 65f5d4a2
PID: OpenXP/5.0.58 (Win32)
CHRS: ASCII 1
TZUTC: -0400
Hello Nicholas!

 AA>> Did not go over well with Aftershock.
 AA>> HTTPS://ibb.co/rx9V6kx

 NB> From the looks of that screenshot, it doesn't look like it
 NB> quotes very well, either, going from 80 or more characters
 NB> wide to 50 characters. But I would imagine if there were
 NB> no initials before the quoted text, it would probably work
 NB> better.

It's not so bad.  The message can also be viewed in landscape.


 NB> Either way, that's because you seem to have Aftershock
 NB> setup for CP437 charset. Those kind of UTF-8 characters do
 NB> not translate to CP437, at all.

Aftershock only has selectable CP437 and CP866.  There is a  
mode "same as device", but I don't know how that works.


 NB> Did Maurice's original message show up ok for you? Because
 NB> I don't think CP866 (at least those characters) translates
 NB> to CP437, either.

The original one was fine in Aftershock.


 NB> Can Aftershock use different charsets?

Dunno.  Maybe "same as device" does that?

-- 
  ../|ug

--- OpenXP 5.0.58
 * Origin:  (2:221/1.58)
SEEN-BY: 10/0 1 15/0 90/1 103/705 105/81 106/201 128/260 135/225 153/7715
SEEN-BY: 154/10 203/0 214/22 218/0 1 601 700 820 840 850 860 870 880
SEEN-BY: 218/930 940 221/1 6 360 226/30 227/114 229/110 112 113 206
SEEN-BY: 229/307 317 400 426 428 470 664 700 266/512 280/464 5003
SEEN-BY: 282/1038 291/111 301/1 113 320/219 322/757 342/200 396/45
SEEN-BY: 423/81 460/58 633/280 712/848 5075/35
PATH: 221/1 301/1 218/700 229/426