->TID: Mystic BBS 1.12 A43
->MSGID: 1:123/120 6219c41d
->REPLY: 1:116/17 b7c3a63a
->TZUTC: -0400
 
Do you have case sensitive passwords ticked in wcConfig|System Security? 
PXTools password should be exactly the same as your WC login password. 
Maybe try changing your wc password and then try pxtools again. 
 
Irex v2.29 working fine here with Window 10 Pro 64bit 
look at the irex logs for errors 
are you running it in daemon mode?  rexw -daemon 
what do the semaphor files indicate? 

-> RW> ->Anyone know how to reset the password in PX? ever since i did the
->upgrad
-> RW> ->can get into it. Thanks
-> RW> ->Sam Penwright
-> RW> What password are you referring to? 
->
->in pxtools when you you try to use editor it asks for a username and password
->my old password does not work its the same as my login for wildcat 7.454.6
->but wont work so I need to figure out how to reset the password in pxtools
->also cant seem to get irex ver 2.99 to work like it did either when i try to
->run the batch screen comes up the disappears no busy in sem file either just
->wont run anymore. It might be time just to abandone 7.0 and go back to what
->worked before.
->Thanks Sam Penwright
->
 
 
 
 
...You can tune a guitar, but you cant tuna fish. 
---BapStats Module (bsDBASE v6.1 Build 1) 
 * Origin: TECHWARE BBS -  Since 1995  -  www.techware.dynip.com/ (1:102/401)
SEEN-BY: 1/19 123 10/0 1 15/0 2 16/0 19/36 34/999 90/1 102/401 103/705
SEEN-BY: 104/57 106/201 116/18 120/331 544 123/130 131 140 153/7715
SEEN-BY: 203/0 124 218/0 1 109 210 215 401 410 520 601 700 720 802
SEEN-BY: 221/0 222/2 226/17 227/114 229/354 426 1014 230/0 150 152
SEEN-BY: 240/5832 249/206 317 250/1 261/38 100 266/512 267/155 275/100
SEEN-BY: 280/464 282/1031 1056 291/1 111 317/3 320/119 219 322/0 757
SEEN-BY: 340/400 342/13 200 396/45 423/81 633/280 712/848 801/161
SEEN-BY: 801/189 3634/12 5020/1042
PATH: 102/401 218/700 261/38 320/219 203/0 280/464 229/426