TZUTC: -0400
MSGID: 15815.windowsa@1:2320/105 25c85b48
REPLY: 1:229/664 9abb71ec
PID: Synchronet 3.18c-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0
TID: SBBSecho 3.12-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0
BBSID: CAPCITY2
CHRS: ASCII 1
>  MP> Is there a COPY command built into Windows 10, that you can use from the
>  MP> command prompt, that will show you the progress of the file copy?

> robocopy would be your friend here.

I will have to see if that one is installed.

> A simpler program if you didn't need a progress meter would be xcopy:

Does xcopy resume the transfer if there is a connection issue, or does it
start over?

I have learned that I can keep the connection "more persistent" than it has
been by opening a Teams meeting.  The VPN might still drop (I think they
kick everyone off after a certain time in the evening), but otherwise the
network adaptor does not get turned off by any "oganizationally forced"
power saving settings.

Mike
--- SBBSecho 3.12-Linux
 * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)
SEEN-BY: 1/123 14/0 15/0 18/200 19/36 90/1 105/81 106/201 116/18 120/302
SEEN-BY: 120/340 123/131 129/305 153/7715 218/700 221/6 222/2 226/30
SEEN-BY: 227/114 702 229/424 426 428 452 664 700 230/150 152 240/1120
SEEN-BY: 240/5832 249/206 317 400 250/1 261/38 100 1466 266/512 267/155
SEEN-BY: 275/100 280/464 282/1038 1056 291/100 111 301/1 113 317/3
SEEN-BY: 320/119 219 322/757 335/364 340/400 341/66 342/200 396/45
SEEN-BY: 633/280 640/1321 712/848 801/161 189 2320/0 33 105 195 304
SEEN-BY: 3634/12 5020/1042
PATH: 2320/105 261/38 301/1 229/426