TZUTC: -0400
MSGID: 15818.windowsa@1:2320/105 25ca1236
REPLY: 1:229/664 d7f2acba
PID: Synchronet 3.18c-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0
TID: SBBSecho 3.12-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0
BBSID: CAPCITY2
CHRS: ASCII 1
>  MP> > A simpler program if you didn't need a progress meter would be xcopy:
>  MP>
>  MP> Does xcopy resume the transfer if there is a connection issue, or does
it
>  MP> start over?

> It's supposed to if you use /Z flag, though I haven't actually tested that.

I will have to try that.  ROBOCOPY thinks I don't have access to a
destination location that COPY and File Explorer have no problems with.  I
think it is a lost cause on a network I don't own.

Mike
--- SBBSecho 3.12-Linux
 * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)
SEEN-BY: 1/123 14/0 15/0 18/200 19/36 90/1 105/81 106/201 116/18 120/302
SEEN-BY: 120/340 123/131 129/305 153/7715 218/700 221/6 222/2 226/30
SEEN-BY: 227/114 702 229/424 426 428 452 664 700 230/150 152 240/1120
SEEN-BY: 240/5832 249/206 317 400 250/1 261/38 100 1466 266/512 267/155
SEEN-BY: 275/100 280/464 282/1038 1056 291/100 111 301/1 113 317/3
SEEN-BY: 320/119 219 322/757 335/364 340/400 341/66 342/200 396/45
SEEN-BY: 633/280 640/1321 712/848 801/161 189 2320/0 33 105 195 304
SEEN-BY: 3634/12 5020/1042
PATH: 2320/105 261/38 301/1 229/426