TZUTC: -0400
MSGID: 15818.windowsa@1:2320/105 25ca1236
REPLY: 1:229/664 d7f2acba
PID: Synchronet 3.18c-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0
TID: SBBSecho 3.12-Linux master/dcb003099 Dec 31 2020 GCC 7.5.0
BBSID: CAPCITY2
CHRS: ASCII 1
>  MP> > A simpler program if you didn't need a progress meter would be xcopy:
>  MP>
>  MP> Does xcopy resume the transfer if there is a connection issue, or does
it
>  MP> start over?

> It's supposed to if you use /Z flag, though I haven't actually tested that.

I will have to try that.  ROBOCOPY thinks I don't have access to a
destination location that COPY and File Explorer have no problems with.  I
think it is a lost cause on a network I don't own.

Mike

 * SLMR 2.1a * Never check for an error you don't know how to handle.
--- SBBSecho 3.12-Linux
 * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)
SEEN-BY: 1/19 123 14/0 15/0 16/0 18/200 19/36 90/1 105/81 106/201
SEEN-BY: 116/18 120/302 340 123/130 131 129/305 153/7715 203/0 218/700
SEEN-BY: 221/0 222/2 226/30 227/114 702 229/424 426 428 452 664 700
SEEN-BY: 230/150 152 240/1120 2100 5138 5411 5832 5853 249/206 317
SEEN-BY: 249/400 250/1 261/38 100 1466 266/512 267/155 275/100 282/1038
SEEN-BY: 282/1056 291/100 111 301/1 317/3 320/119 219 319 322/0 757
SEEN-BY: 340/400 341/66 342/200 396/45 633/280 640/1321 712/848 801/161
SEEN-BY: 801/189 2320/0 33 105 195 304 2432/390 2454/119 3634/12 5020/1042
PATH: 2320/105 261/38 320/219 240/5832 229/426