TZUTC: -0400
MSGID: 2075.windowsb@1:2320/105 2329e688
PID: Synchronet 3.18a-Linux  May  3 2020 GCC 7.5.0
TID: SBBSecho 3.11-Linux r3.172 May  3 2020 GCC 7.5.0
CHRS: ASCII 1
Howdy!,

I have a Epson NX430 all in one printer/scanner.

A long tme ago I raised the Document Cover to Scan something and the
Cover came off of the unit.

I have tried and tried again and again to put the Hinges back in the
two slots at the back but never have been able to get both of them in
correctly.

The last time I tried one of the Hinges got all the way down in its slot,
the other Hinge stayed up about 1/8 inch, and when I scan a small piece
of paper I can see a Black wedge shape mark on the Left side of the
Preview Screen.

The NX430 Manual doesn't have any information about replacing the Document
Cover.

I tried again some yesterday and decided to submit a Comment to Epson Support.
The answer I got from Epson is to take it to a Epson Service Shop.

Their closest Shop is 70 miles from where I live, so I thought to write here
about my problem because I can read BBS messages sitting in my home.

Thanks for reading.

73 de Ed W9ODR             .           .

... XT or AT, it makes a big difference.
--- MultiMail/MS-DOS v0.49
 * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)
SEEN-BY: 1/123 90/1 120/340 601 123/131 226/30 227/114 702 229/101
SEEN-BY: 229/424 426 452 664 1014 240/5832 249/206 317 400 292/854
SEEN-BY: 317/3 322/757 342/200 633/280
PATH: 2320/105 261/38 218/700 103/705 280/464 229/101 426