MSGID: 1:153/757.21@fidonet f8f4656e
REPLY: 2:280/464.27 29c40f04
PID: OpenXP/5.0.51 (Win32)
CHRS: ASCII 1
TZUTC: -0500
Hello Martin Foster!

** On Monday 31.01.22 - 09:17, Martin Foster wrote to August Abolins:

 MF> Hello August!

 MF> *** Sunday 30.01.22 at 14:03:00, August Abolins wrote to Carlos Navarro:

 CN>>> 3. When you reply to a message, you can split a quoted line into two by
 CN>>> pressing Enter at the position you want to be split. However, if you
 CN>>> join two quoted lines (e.g. by pressing Backspace or Del) it does not
 CN>>> reformat the quoted text, so you have to manually remove the quote
 CN>>> prefix (e.g. "TS> ") that remains there. GoldEd does this nicely (don't
 CN>>> know about other editors). If it is not too much work, it would be
 CN>>> great to have this.

 AA>> Doesn't the R)eflow or (Crl+R) work?

 MF> Nope.

In the old version, if I use the backspace to bring up the 3rd  
line as in this example..

    aa> akjdkjf akdfa akdf dkj akdjfkaj akjfdkaj
    aa> akdfkj afjdj  skj dsk kdsjdjk djidij
    aa> jsdkjs dsk sj

..I would get this result:

    aa> akjdkjf akdfa akdf dkj akdjfkaj akjfdkaj
    aa> akdfkj afjdj  skj dsk kdsjdjk djidij aa> jsdkjs dsk sj


..then YES, the extra aa> comes along for the ride.

But I revisited the issue using Golded just now, and YES.. the  
extra quote prefix gets auto-romoved, AND the line auto adjusts  
for the right length. That's pretty cool.

However.. in Winpoint, if I just highlight the original block  
(the first example in this message) the Reflow takes care of  
the problem.
--
  ../|ug
--- OpenXP 5.0.51
 * Origin: My Westcoast Point (1:153/757.21)
SEEN-BY: 15/0 30/0 106/201 124/5016 129/331 134/100 153/0 757 7715
SEEN-BY: 203/0 221/0 1 6 229/110 317 426 428 664 700 240/1120 266/512
SEEN-BY: 280/464 5003 282/464 1038 292/854 8125 301/0 1 101 113 310/31
SEEN-BY: 317/3 320/219 335/364 341/66 234 396/45 460/58 712/848 920/1
SEEN-BY: 2452/250 5058/104
PATH: 153/757 280/464 301/1 229/426