MSGID: 2:240/1120.29 3ffe8709
CHRS: CP850 2
TZUTC: 0100
Hi,

I checked. Indeed there is a single point where the software processes the
adress that is not working for IPv6. Basically pretty easy to fix, ONCE I find
or build the necessary header files to use WinSock2 under Delphi 2007 ...

Best,
Tim 

>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<
> This message has been _forwarded_! The original message was:              <
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<
>    Area: *WINPOINT*
>    From: *Tim Schattkowsky(2:240/1120.29)*
>      To: *Tommi Koivula*
> Subject: *Re: Two dumb questions*
>    Sent: *28.02.22* *18:39:30*
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<

Hello Tommi,

on 28.02.22 at 16:00:24 You wrote in Area WINPOINT
to Michiel van der Vlist about "Two dumb questions".

 MvdV>> 2) Does Winpoint support IPv6?

 TK> 28 02 22 17.56.29 HOST Connecting to host v6.fidonet.fi:24554
 TK> 28 02 22 17.56.29 MAKE Making Connection 
 TK> 28 02 22 17.56.29 IREM Invalid remote address 
 TK> 28 02 22 17.56.29 FAIL Connection failed

 TK> Apparently not.

Indeed. Will check soon.

Regards,
Tim

-+- WinPoint 401.1
 @ Origin: Original WinPoint Origin! (2:240/1120.29)
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<
>                      End of forwarded message                             <
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<

Regards,
Tim
--- WinPoint 401.1
 * Origin: Original WinPoint Origin! (2:240/1120.29)
SEEN-BY: 15/0 92/1 106/201 129/331 153/7715 218/700 221/1 6 229/110
SEEN-BY: 229/317 426 428 664 700 240/1120 266/512 280/464 282/1038
SEEN-BY: 292/854 301/1 113 317/3 320/219 335/364 341/66 371/0 396/45
SEEN-BY: 460/58 712/848 2452/250 3634/12 5020/1042 5058/104
PATH: 240/1120 301/1 229/426