MSGID: 2:280/5555.10 464c4f83
CHRS: IBMPC 2
TZUTC: 0100
REPLY: 2:240/1120.29 46412583
Hallo Tim,

on *10.03.22* at *14:03:49* you wrote in the Area *WINPOINT*
to *Rinaldo Visscher* one message with
Thema *"Re: Poll second node, polls first adres"*.

 TS>>> WP actually internally polls by Mailbox Node number when you select a
 TS>>> Mailbox from the menu ... so if two mailboxes come down to the same
 TS>>> node number the mechanics cause it to use the configuration from the
 TS>>> first matching mailbox. Yes, that is unexpected and I am not a fan of
 TS>>> it, but its usually a non-issue.

 RV>> Programm technical it's possible to make an array. I used the same fido
 RV>> adress but another URL. It's must be possible

 TS> This is just a design flaw. For sure this can be repaired, but like
 TS> anything it takes time and I have other priorities. Usually this comes
 TS> only up, when people produce invalid configurationts during testing. I
 TS> keep running into it myself during tests, but not in relevant scenarios.

Understandable. Don't know how Delphi (was it Delphi) handles array in
variable lenghts.

               Rinaldo Visscher
--- WinPoint 404.0
 * Origin: C-Sharp programmer (2:280/5555.10)
SEEN-BY: 15/0 106/201 124/5016 129/331 153/757 7715 203/0 218/700
SEEN-BY: 221/0 229/110 317 426 428 664 700 266/512 280/464 5003 5555
SEEN-BY: 282/1038 292/854 8125 301/1 310/31 317/3 320/219 341/234
SEEN-BY: 396/45 460/58 712/848 770/1 2452/250
PATH: 280/5555 464 712/848 229/426