MSGID: 2:240/1120.29 466ef004
CHRS: IBMPC 2
TZUTC: 0100
REPLY: 2:280/5555.10 464c4f83
//Hello Rinaldo,//

on *10.03.22* at *14:33:58* You wrote in Area *WINPOINT*
to *Tim Schattkowsky* about *"Poll second node, polls first adres"*.

 RV> Hallo Tim,

 RV> on 10.03.22 at 14:03:49 you wrote in the Area WINPOINT to Rinaldo
 RV> Visscher one message with
 RV> Thema "Re: Poll second node, polls first adres".

 TS>>>> WP actually internally polls by Mailbox Node number when you select a
 TS>>>> Mailbox from the menu ... so if two mailboxes come down to the same
 TS>>>> node number the mechanics cause it to use the configuration from the
 TS>>>> first matching mailbox. Yes, that is unexpected and I am not a fan of
 TS>>>> it, but its usually a non-issue.

 RV>>> Programm technical it's possible to make an array. I used the same fido
 RV>>> adress but another URL. It's must be possible

 TS>> This is just a design flaw. For sure this can be repaired, but like
 TS>> anything it takes time and I have other priorities. Usually this comes
 TS>> only up, when people produce invalid configurationts during testing. I
 TS>> keep running into it myself during tests, but not in relevant scenarios.

 RV> Understandable. Don't know how Delphi (was it Delphi) handles array in
 RV> variable lenghts.

Think I fixed it through some refactoring. Please test in next release.

Regards,
Tim

--- WinPoint 405.1
 * Origin: Original WinPoint Origin! (2:240/1120.29)
SEEN-BY: 1/120 15/0 18/0 106/201 123/0 129/331 138/146 153/7715 218/700
SEEN-BY: 229/110 317 426 428 664 700 240/1120 250/1 266/512 275/100
SEEN-BY: 275/1000 282/1038 291/111 292/854 301/1 317/3 320/219 335/364
SEEN-BY: 342/11 371/0 396/45 460/58 640/1321 712/848 2452/250 3634/0
SEEN-BY: 3634/12
PATH: 240/1120 3634/12 153/7715 229/426