MSGID: 2:280/5555.10 88801c03
CHRS: UTF-8 4
TZUTC: 0200
REPLY: 2:240/1120.29 879ff730
Hallo Tim,

on *14.06.22* at *18:07:14* you wrote in the Area *WINPOINT*
to *Rinaldo Visscher* one message with
Thema *"Re: Problem ipv6 vs ipv4"*.

 TS> Hello Rinaldo,

 TS> on 14.06.2022 at 17:31:06 You wrote in Area WINPOINT to Tim Schattkowsky
 TS> about "Problem ipv6 vs ipv4".

 RV>>>>  If I poll my boss with a ipv6 number and the party is unable to
 RV>>>> switch

 TS>>> What does that mean. An ipv6 address in [...] form or DNS resoloved to
 TS>>> IPv6?

 RV>> If I poll with ipv6 and the boss does have only ipv4 connection
 RV>> connection at winpoint site does not fallback to ip4

 TS> Your terminology is ambiguous as there is no "poll with ipv6" button in
 TS> the software. So I am still not sure what you mean.

 TS> Please tell me what host name do you use for polling and what do you
 TS> think what happens and what should happen.

 TS> For now, I suspect you use a host name that resolves to IPv6 (or even is
 TS> an actual IPv6 address), but the IPv6 connection does not work (for
 TS> whatever reason that is probably outside WP) and you now expect WP to
 TS> automatically fallback to IPv4 for the same host !?

 The ipv6 button on the software is the button POLL. If the other site does
not respond on the ipv6 call, winpoint hangs on the terminalscreen expecting a
ipv4 call.

Don't know how to explain but what are possble other reasons outsite the
program  WP hangs?

{
try
 call ipv4
  if(failed)
   call ipv6

simplyfied code

               Rinaldo Visscher
--- WinPoint 407.0
 * Origin: C-Sharp programmer (2:280/5555.10)
SEEN-BY: 15/0 106/201 124/5016 129/331 153/757 7715 203/0 221/0 229/110
SEEN-BY: 229/111 112 113 317 426 428 470 664 700 240/1120 266/512
SEEN-BY: 280/464 5003 5555 282/1038 292/854 8125 301/1 310/31 317/3
SEEN-BY: 320/219 341/234 396/45 460/58 633/280 712/848 770/1 2452/250
PATH: 280/5555 464 712/848 229/426